There are many reasons to hire a Tile & Grout Cleaning Service. Not only does it preserve the appearance of premium building materials, but it also helps maintain your home’s overall health. Did you know that indoor air can contain up to 100 times more pollutants than the air outside? Although we would like to think that our home is a safe haven, a buildup of dust, dirt, and pet dander can make it anything but.
Cost of tile & grout cleaning
The initial cost of tile & grout cleaning services will vary greatly depending on the scope of the work. This includes set up and mobilization time, minimum hourly charges, and additional costs related to hazardous material testing and remediation. A representative from a professional tile cleaning company will look over the job site to give you a fair estimate of the final costs. For an average room with dirty tiles, you should expect to pay between $100 and $200.
Typically, professional tile and grout cleaning services charge a flat fee per 150-250 square foot room. However, the cost may be much more or less depending on the size and number of grout lines. Prices are usually determined by square footage and per square foot, with smaller tile areas requiring more thorough cleaning. Grout is a mix of cement, sand, and water that fills the spaces between tiles. As dirt and grease buildup, grout begins to look dirty and create marks and patches on your tile floor. Fortunately, there are many ways to clean grout and tile.
Grout cleaners charge more if they need to move heavy appliances and furniture from the floor. Some will move lightweight furniture for free, but may charge more if it is large and heavy. Make sure to specify where these items are so the cleaning crew can avoid them. Some may not move delicate or antique pieces. This is especially true for bathroom grout. So, be sure to ask about any additional fees before hiring a tile & grout cleaning service.
Time it takes to clean
You may be wondering how long it takes to clean tile & grout. The answer depends on the kind of grout and tile you have. While tile is typically a long-lasting material, it can lose its appearance if it gets dirty. Grout and tile can develop holes or cracks over time. If these are left untreated, they can leak water or even mold into drywall behind the tiles. Other causes of loose grout include ground shifts, harsh chemicals and age.
The main supplies needed to clean tile and grout include abrasive cleaning solutions, high-pressure cleaners and sealants. Typical rooms for tile and grout cleaning include kitchens and bathrooms. Knowing the production rate of tile and grout cleaning services will help you plan your budget and staff accordingly. For example, if you want to clean a standard bathroom, you can charge between $100 and $300 per room. However, larger bathrooms, such as the master bathroom, may cost up to $300, which takes anywhere from two to three hours. Similarly, a 300-square-foot kitchen might cost anywhere from $300 to $400 and require between one to six hours of labor.
In addition to a deep cleaning, regular mopping can help keep the grout lines clean. For areas that are heavily trafficked, deep cleaning may be necessary. Make sure to wear gloves when cleaning the grout. Apply commercial tile and grout cleaner and follow the manufacturer’s directions. If you’re using a harsh chemical, you could permanently damage the tiles and require costly tile replacement. Grout, on the other hand, is porous and needs regular mopping. The first step in cleaning tile & grout is to thoroughly mop the area to remove surface dust and embedded dirt.
Efficacy of home cleaning methods
Efficacy of home cleaning methods for floor tiles and grout may vary. If you’re not sure which cleaning solution will work best, ask a contractor for tips. Some products are too harsh for grout, so start with a mild one, and test a small section before using it on the entire floor. Another way to ensure a clean floor is to dry mop daily, and avoid scrubbing with hard materials such as sponges or brooms.
While cleaning tile surfaces at home can be fun and convenient, it can’t replace a professional cleaning service. Professionals are able to use commercial-grade cleaning products, which are safer and more effective than those manufactured for home use. Also, DIY cleaning methods may not work as effectively as you might hope, and you may end up spending more money than you intended on trying to clean your grout. Therefore, it’s always best to hire a professional.
While professional cleaning services can be effective in cleaning tile and grout, home cleaning products should be chosen based on the type of stain and the type of tile and grout you have. While some grout cleaners are effective, others have chemicals that may damage colored grout. If your grout is colored, choose a product that matches it. Some cleaners contain ammonia or acids that can damage tile or grout. EPA Safer Choice label ensures that the product you buy meets strict health standards.